"111111111" as the storage device user password and enable erasing the contents of the
storage device by using this default password. The options are Disabled, Set Password,
Change Password, Clear Password, Security Erase - Password, Security Erase - PSID, and
Security Erase - Without Password.
Notes:
l
The option of Security Erase - PSID is based on the storage device support. PSID is
the abbreviation for Physical Security Identification.
l
The options of Change Password and Clear Password are available when "Password"
below has been set.
l
The option of Set Password is not available when "Password" below has been set.
Password
Use this feature to set the storage device user password, which enables configuring the
Supermicro Security Erase settings by using this user password.
New Password (Available when "Password" above has been set)
Use this feature to set the new user password for the storage device, which enables configuring
the Supermicro Security Erase settings by using this new user password.
135
X14SAE/X14SAE-F: UEFI BIOS
To Next Page
Loading...
