Motherboard Features
System Health Monitoring
l
Onboard voltage monitoring for +12 V, +5 V, +3.3 V, CPU, Memory, VBAT, +5 V stdby, +3.3 V
stdby, +1.8 V PCH, +1.05 V PCH, CPU temperature, VRM temperature, PCH temperature,
system temperature, and memory temperature
l
Five CPU switch phase voltage regulators
l
CPU thermal trip support
l
Platform Environment Control Interface (PECI)/TSI
Fan Control
l
Triple cooling zones
l
Multi-speed fan control via Embedded Controller (X14SAE) or BMC (X14SAE-F)
l
Seven 4-pin fan headers
System Management
l
SuperServer Automation Assistant (SAA)
l
Trusted Platform Module (TPM) support
l
SuperDoctor® 5
l
Chassis intrusion header and detection
Note: Connect a cable from the Chassis Intrusion header at JL1 to the chassis to receive an alert.
LED Indicators
l
Standby Power LED (X14SAE)/BMC Heartbeat LED (X14SAE-F)
l
Catastrophic Error LED (CATERR_LED)
l
Onboard Power LED (LEDPWR)
l
LAN activity/status LEDs (on LAN1/2 port)
l
UID LED (X14SAE-F)
Dimensions
ATX, 12" (L) x 9.6" (W) (304.8 mm × 243.8 mm)
23
X14SAE/X14SAE-F: Introduction
To Next Page
Loading...
