3. Align the key of the DIMM with the receptive point on the memory slot.
Figure 2-17. Align the DIMM Slot with the Receptive Point
4. Align the notches on both ends of the module against the receptive points on the ends of
the slot.
Figure 2-18. Align the Notches
5. Press both ends of the module straight down into the slot until the module snaps into
place.
6. Press the release tab to the lock position to secure the DIMM into the slot.
46
X14SAE/X14SAE-F: Component Installation
To Next Page
Loading...
