Sur-Gard System I - Page 100

APPENDIX A - EVENTS and MESSAGES
93
SG-System I Operating Manual
A
Max Accounts Exceeded
(where IP is
transmitters IP, and X is
the transmitters
account)
001003[#XXXXXXXXXX|NJO
*10.0.0.1*]
01-003-XXXXXXXXXX-JO-*Maximum
Accounts Exceeded 10.0.0.1*
Transmitter Deleted
(where IP is
transmitters IP, and X is
the transmitters account
001003[#XXXXXXXXXX|NJX
*10.0.0.1*]
01-003-XXXXXXXXXX-JX-*Transmitter
Deleted 10.0.0.1*
Unknown Account (where
IP is transmitters IP,
and X is the transmitters
account)
001003[#XXXXXXXXXX|NXA
*10.0.0.1*]
01-003-XXXXXXXXXX-XA-*Unknown
Account 10.0.0.1*
IP Channel has reached
75% capacity of its table
001003[#0000|NJL
*192.168.2.184*]
01-003-0000-JL-*Account table 75%
full 10.0.0.1*
AHS Database Full NA 01-000-0000--CPM AHS Database Full
AHS write to memory start NA 01-000-0000--AHS Flash Start
(ACTIVE)
AHS write to memory done NA 01-000-0000--AHS Flash Done (ACTIVE)
Reset fallback 001000[#0000|NYY0000] 01-000-0000-NYY0000-Reset SG-
Fallback Initiated
Console Lead In IP
Channel
001003[#0000|NRB*10.0.
0.1*]
01-003-0000-RB-Console Account Port
Lead In
Console Lead Out IP
Channel
001003[#0000|NRS*10.0.
0.1*]
01-003-0000-RS-Console Account Port
Lead Out
Reset by console NA 01-000-0000--RESET by Console
Reset by User NA 01-000-0000--RESET by LCD/UI
License key entered is
incorrect
NA 01-000-0000--Invalid License Key
Firmware update has been
started via TCP port
NA FIRMWARE DOWNLOAD INITIATED <TCP>
Firmware update has been
started via USB port
NA FIRMWARE DOWNLOAD INITIATED <USB>
Firmware has been
updated to <version>
NA FIRMWARE UPDATED to vX.XX.XX.XXX
Firmware update has
failed
NA FIRMWARE UPDATE FAILED
IP account table has been
set by the console
application
NA 01-000-0000--Console SET Account
Table
IP account table has been
requested by the console
application
NA 01-000-0000--Console GET Account
Table
a.
b.
c.