15-14 FRONT FORK AND STEERING
• With the outer tube compressed by hands, remove the special
tool.
• Loosen the fork cap bolt
1 (sub-tank) and remove the sub-
tank
5 along with the damper rod assembly
6.
• Remove the fork spring
7 and spring coller
8.
• Remove the dust seal
9 and the stopper ring
0.
CAUTION
Removing the locknut
4 and pushing the inner rod
thread into the damper rod will damage the inner rod
oil seal.
Do not remove the locknut
4 from the inner rod.
CAUTION
Disassembling the damper rod assembly can lead to
trouble.
Do not disassemble the damper rod assembly.
Do not separate the sub-tank and damper rod assem-
bly.
CAUTION
Scratches on the inner tube could cause oil leaks.
Avoid scratching when removing.
To Next Page
Loading...
