Suzuki RM85L - Page 108

TRANSMISSION AND CRANKSHAFT 10-5
• Inspect the gearshift forks and shafts for wear and damage.
• Measure the gearshift fork thickness with a vernier calipers.
 Gearshift fork thickness
• Measure the gearshift fork groove width with a vernier cali-
pers.
 Gearshift fork groove width
• Measure the gearshift fork to groove clearance with a thick-
ness gauge.
 Gearshift fork – Groove clearance
Service Limit: 0.45 mm (0.018 in)
Standard
No. 1 3.80 – 3.90 mm (0.150 – 0.154 in)
No. 2 & No. 3 4.30 – 4.40 mm (0.169 – 0.173 in)
Standard
No. 1 3.95 – 4.05 mm (0.156 – 0.159 in)
No. 2 & No. 3 4.45 – 4.55 mm (0.175 – 0.179 in)