FRONT AND REAR BRAKES 15-7
• Apply low-pressure air into the caliper through the hole to
remove the piston.
• Remove the piston seal 1 and dust seal 2.
REAR CALIPER REMOVAL AND
DISASSEMBLY
• Drain brake fluid. (15-4)
• Place a rag under the brake hose union bolt to catch spilled
brake fluid.
• Remove the caliper mounting bolts 1 and, disconnect the
brake hose 2.
WARNING
Fingers can get caught between piston and caliper
body when removing the piston.
Do not place your fingers on the piston when remov-
ing the piston.
To Next Page
Loading...
