Suzuki RM85L - Front Fork Reinstallation

FRONT FORK AND STEERING 16-11
REINSTALLATION
• Reinstall the front forks.
• Set the aligning line T on the outer tube to the upper surface
of the steering stem head.
• Check that the air valve A is positioned at the front.
• Tighten the fork lower clamp bolts 1 to the specified torque.
 Fork lower clamp bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Tighten the fork cap bolt 2 to the specified torque.
 Fork cap bolt: 35 N·m (3.5 kgf-m, 25.5 lb-ft)
• Tighten the fork upper clamp bolts 3 to the specified torque.
 Fork upper clamp bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Install the front wheel. (14-4)
• Install the brake caliper. (15-8)
• Install the fork covers, brake hose guide and brake hose
cover.