Suzuki RM85L - Water Pump Reassembly

12-6 COOLING SYSTEM
WATER PUMP REASSEMBLY
• Apply THREAD LOCK SUPER “1322” to the outer surface of
the oil seal. Install the oil seal with a proper tool.
 99000-32110: THREAD LOCK SUPER “1322”
• Apply grease to the machanical seal lip.
• Insert the water pump shaft.
• Install the bearing with the special tool.
 09916-44910: Valve guide driver
09916-53340: Valve guide installer
• Install the snap ring 1.
• Reassemble the clutch cover and water pump cover.
(7-5)
• Connect the radiator hose.
• Pour engine coolant and transmission oil. (2-7 and -8)