15-8 FRONT AND REAR BRAKES
• Remove the brake pads and spring 3 from the caliper.
• Remove the caliper bracket 4.
• Wrap the caliper with a rag to prevent brake fluid scatter and
piston pop-out.
• Apply low-pressure air into the caliper through the hole to
remove the piston.
• Remove the piston seal 5 and dust seal 6.
CALIPER INSPECTION
• Inspect the caliper cylinder wall and piston surface for
scratch, corrosion or other damages. If any abnormal condi-
tion is noted, replace the caliper.
• Inspect the rubber parts. If any damages are found, replace it
with a new one.
WARNING
Fingers can get caught between piston and caliper
body when removing the piston.
Do not place your fingers on the piston when remov-
ing the piston.
To Next Page
Loading...
