10-4 TRANSMISSION AND CRANKSHAFT
TRANSMISSION REMOVAL
• Remove the gearshift fork shafts 1 and forks 2.
• Remove the gearshift cam 3.
• Remove the driveshaft ass’y 4 and countershaft ass’y 5.
CRANKSHAFT REMOVAL
• Remove the crankshaft with the special tool.
09920-13120: Crankcase separating tool
TRANSMISSION INSPECTION
• Inspect the gear teeth, dogs, and gearshift grooves for abnor-
mal wear and damage.
• Inspect the bushings and splines for abnormal wear and dis-
coloration.
• Inspect the gearshift cam groove for abnormal wear and dam-
age.
To Next Page
Loading...
