16-4 FRONT FORK AND STEERING
• Compress the front fork spring 3 and loosen the lock-nut 1.
• Remove the fork cap 2.
• Remove the fork spring 3.
• Remove the lock-nut 4 and the spring guide 5.
• Invert the front fork and stroke the inner rod several times to
let out fork oil.
• Under the inverted condition of front fork, drain oil to hold it for
a few time.
• Remove the damper rod bolt with the special tool.
09940-30250: Front fork assembling tool
• Remove the damper.
CAUTION
Do not disassemble the damper rod assembly. Disas-
sembling the damper rod assembly can lead to trou-
ble.
To Next Page
Loading...
