SHAFT
DRIVE AND
DIFFERENTIAL
4-21
•
Install
the
differential assembly into
the
differential driven
bevel gear housing.
•
Place the removed shims on the differential bevel gear hub.
•
Install
the
differential driven bevel gear
on the
differential
•
Install the removed shim on the drive bevel gear housing.
•
Install the drive bevel gear into the differential driven bevel
gear housing and tighten its bolts to the specified torque.
[3 Front drive bevel gear housing
bolt:
23 N m (2.3 kgf-m, 16.5
Ib-ft)
To Next Page
Loading...
