Suzuki Vinson LT-A500F - Page 139

4-20 SHAFT DRIVE AND DIFFERENTIAL
DIFFERENTIAL DRIVEN BEVEL GEAR AND DIFFERENTIAL
ASSEMBLY
• Install a new driven bevel gear bearing using the special tool.
09913-70210: Bearing installer set
NOTE:
When installing the bearing, tap on the punched mark side of
the bearing with the bearing installer.
• Install a new front driven output shaft bearing using the spe-
cial tool.
09913-70210: Bearing installer set
09924-74520: Bearing installer
NOTE:
When installing the bearing, tap on the punched mark side of
the bearing using the bearing installer.
• Install a new differential driven bevel gear housing right bear-
• Install new oil seals using the special tool.
IT55L1 09913-70210: Bearing installer set