Suzuki Vinson LT-A500F - Page 49

• Tighten the rear propeller shaft joint bolts to the specified
torque.
H Rear propeller shaft joint bolt:
23 N m (2.3 kgf-m, 16.5 Ib-ft)
• Apply THREAD LOCK "1342" to the front propeller shaft joint
bolts, and then tighten it to the specified torque.
tJ33 99000-32050: THREAD LOCK "1342"
[5 Front propeller shaft joint bolt:
45 N m (4.5 kgf-m, 32.5 Ib-ft)
• Install the gearshift arm to the camshaft.
NOTE:
Make sure to align the marks made on the gearshift arm and
the camshaft when installing the gearshift arm.
• Install the gearshift arm as shown.
NOTE:
Make sure the transmission is in the neutral position ©.
• Tighten the exhaust pipe nut to the specified torque.
H Exhaust pipe nut: 23 N m (2.3 kgf-m, 16.5 Ib-ft)