Using Calculator
Using the Calculator buttons
Using Your Zodiac Handheld 114
Using the Calculator buttons
Calculator includes several buttons to help you perform calculations.
• Clears the last number you entered. Use this button if you make a
mistake while entering a number in the middle of a calculation. This
button enables you to re-enter the number without starting the
calculation over.
• Clears the entire calculation and enables you to begin a fresh
calculation.
• Toggles the current number between a negative and positive
value. If you want to enter a negative number, enter the number first
and then press the +/- button.
• Places the current number in memory. Each new number you
enter with the M+ button is added to the total stored in memory. The
number that you add can be either a calculated value or entered by
pressing the number buttons. Pressing this button has no effect on the
current calculation (or series of calculations); it merely places the value
into memory until it is recalled.
• Recalls the stored value from memory and inserts it in the current
calculation.
• Clears any value stored in Calculator’s memory.
To Next Page
Loading...