Technogym SELECTION 700 - Disassembling the Kneepads

7.2.6.3 DISASSEMBLING THE KNEEPADS
13
1. Loosen two screws
[13] for each kneepad.
(TOOL: 5 mm hexagon
key wrench).
During the reassem-
bly procedure, block
the screws with glue
(green color)
14
2. Remove the kneepad
[14] towards the top, as
shown in the gure.
During the reassembly
procedure apply me-
dium strength thread-
locker.
SELECTION 700 Technical Service Guide
Rev. 2.0
- 106 - Document uncontrolled when printed