Technogym SELECTION 700 - Disassembling the Backrest Padding; Disassembling the Popliteus-Rest Padding

8.2.13 DISASSEMBLING THE BACKREST PADDING
1. Perform the steps described in the paragraph “6.2.6.1 Disassembling the backrest padding”
8.2.14 DISASSEMBLING THE POPLITEUS-REST PADDING
12a
12
1. Unscrew the two screws
[12a]. (TOOL: 8 mm hexa-
gon key wrench).
2. It’s now possible to remove the padding [12].
SELECTION 700 Technical Service Guide
Rev. 2.0
- 142 - Document uncontrolled when printed