Technogym SELECTION 700 - Equipment Testing after the Intervention of Technical Service

Fig. 75
3. Move the cross up and down, making sure to distribute the oil evenly along the full length of
the bars.
4. Dry excess oil from the bushings with a dry cloth.
5.7 EQUIPMENT TESTING AFTER THE
INTERVENTION OF TECHNICAL SERVICE
After a technical service intervention, the technician MUST check - in the same conditions in which
the customer discovered the problem - that the fault has been resolved.
The technician MUST perform the following tests:
• Select the maximum weight and stress the cable to check if the grub screws hold the ca-
bles;
• Select a maximum of 5-10 Kg and check the uidity of the equipment;
• Make sure that the machine regulations do not have play and reach their correct positions,
without play.
It’s also necessary to perform the following checks:
• Check the presence / the state of wear of warning labels. Check if the warning labels are
readable;
• If the equipment must be xed to wall / ground / ceiling or together with other machines:
check that the equipment is actually xed.
SELECTION 700 Technical Service Guide
Rev. 2.0
- 80 - Document uncontrolled when printed