Technogym SELECTION 700 - Levelling the Equipment

3b
3. Adjust the position of the
eccentric [3b]. (TOOL: 24
mm open end wrench)
12.3 LEVELLING THE EQUIPMENT
WARNING: Given the weight of the product, we recommend that it should always be lifted
by more than one person.
This operation applies to MNLC- LAT MACHINE. The two feet on the front side of the equip-
ment, under the weight stack, prevent the frame from exing during an exercise.
1. Turn the feet slightly to the right or left so that they come into contact with the oor.
2. Then tighten the lock nuts. (TOOL: 17 mm open end wrench).
For details, see the following gure:
SELECTION 700 Technical Service Guide
Rev. 2.0
- 216 - Document uncontrolled when printed