Technogym SELECTION 700 - Disassembling the Handle Grip; Disassembling the Unlocking Lever

7.2.8 DISASSEMBLING THE HANDLE GRIP
1. Remove the handle
grip of the easy start le-
ver. (TOOL: Adjustable
self-locking pliers).
Do not use the protective
cloth if the handle grip
needs to be replaced.
7.2.9 DISASSEMBLING THE UNLOCKING LEVER
1. Remove the screw, the
relative washer and then
the pin. (TOOL: 2x 4 mm
hexagon key wrench).
SELECTION 700 Technical Service Guide
Rev. 2.0
- 109 -Document uncontrolled when printed