Technogym SELECTION 700 - Mnac- Leg Press; Disassembling the Rear Protective Weight Stack Panel

10.2 MNAC- LEG PRESS
10.2.1 DISASSEMBLING THE REAR PROTECTIVE WEIGHT
STACK PANEL
1. Unscrew the four
screws [C]. (TOOL:
5 mm hexagon key
wrench).
2. Unscrew the two
screws [D]. (TOOL:
ratchet with 4 mm
hexagonal bit).
SELECTION 700 Technical Service Guide
Rev. 2.0
- 188 - Document uncontrolled when printed