Technogym WAVE EXCITE+ - 700 VISIO Version

Cardio WAVE EXCITE +: Service & maintenance manual - rev. 4.1
Pagina 7.3
7.1.3. 700VISIO VERSION
Figure 7.1-7
Turn off the machine and unplug the mains lead
from the wall outlet:
1. Back off the 4 screws (a)
using a medium
Phillips Screwdriver.
Figure 7.1-8
2. Back off the 2 screws (b) using a 3mm
hexagonal wrench, on both side.
Figure 7.1-9
3. Unplug the connectors highlighted in the
figure at the side.
4. Remove the Display.
CAUTION: Connect the network cables
(on the left in the photo) correctly,
because they may not be inverted.
To reassemble the VISIO Display,
carry out the above steps in reverse order.