Cardio WAVE EXCITE +: Service & maintenance manual - rev. 4.1
Pagina 12.2
12.1. ORDINARY MAINTENANCE OPERATION
12.1.1. SETTING UP THE OPERATION (DAILY)
1. Turn off the machine by placing the switch in position 0 (OFF).
2. Unplug the mains lead from the wall outlet.
12.1.2. EXTERNAL CLEANING OPERATIONS (DAILY)
1. Using a cloth moistened with a neutral detergent (non acidic), clean the entire machine, taking
care not to rub too vigorously, especially on the keys of the display.
Never spray the cleaning product directly on the machine.
WARNING: do not use alcohol, petrol or other chemical products.
12.1.3. INTERNAL CLEANING OPERATIONS (MONTHLY)
1. Turn off the machine by placing the switch in position 0 (OFF).
2. Unplug the mains lead from the wall outlet.
3. Open the motor guard.
4. Use a vacuum cleaner to clean the interior, paying particular attention to the tread belt motor and
the electronic circuit boards.
ATTENTION: when carrying out these operations, be careful not to damage the cables.
5. Move the machine and clean the floor underneath using a vacuum cleaner.
12.1.4. COMPLETE OPERATION (SIX-MENTHLY)
1. To check that the switch, the tool maintains the reset procedure
2. To check the correct operation of the machine, get on the machine:
• press the “Quick Start” key to begin the exercise and check that the tread belt motor starts;
• press the Fast Track and check that the machine change intensity of exercise;
• put on the heart rate meter and check that the machine correctly reads the heart rate value;
• grasp the HS and check that the machine correctly reads the heart rate value.