Technogym WAVE EXCITE+ - No Resistance Troubleshooting

Cardio WAVE EXCITE +: Service & maintenance manual - rev. 4.1
Pagina 6.20
6.10. THERE IS NO RESISTANCE
The machine will not produce resistance if:
• the display board is not receiving a speed signal;
• the Brake Board is not generating current;
• the brake is defective.
Does the Br ake Boar d supply
tension at the br ake?
THERE IS NO
RESISTANCE
Are the Watt and SPM values
shown on the display di fferent
from zero?
NO
YES
1
Car r y out the "The speed
sig nal is incorr ect"
troubl eshooting procedure
Repl ace the Br ake Boar d
YES
Is there the tension to the i nput
of the brake?
NO
Repl ace the Br ake
YES
Repl ace
connecting cabl e
NO
3
YES
Is the resistance on the Brake
winding more or l ess 5 Ohm?
Repl ace the Br ake
NO
2
SELF-POWERED