Technogym WAVE EXCITE+ - Secondary Shaft Group Disassembly (Self-Powered)

Cardio WAVE EXCITE +: Service & maintenance manual - rev. 4.1
Pagina 7.42
7.15.2. SELF-POWERED MODELS
Figure 7.15-3
9. Back off the two screws (g)
using a 3mm
hexagonal wrench.
10. Back off the grub screw (h)
using a 2.5mm
hexagonal wrench.
11. Remove the piece (i).
12. Remove the secondary shaft assembly from
the belt and place it on a work bench.
Figure 7.15-4
13. Remove the stator (l) from the flywheel (m),
pulling out one from the other.
Continued on following page ...