Cardio WAVE EXCITE +: Service & maintenance manual - rev. 4.1
Pagina 7.30
7.9. DISASSEMBLING THE BRAKE BOARD BOX
Figure 7.9-1
Carry out the operations described in
paragraphs:7.7. “Disassembling the guards”
fino al punto (4).
1. Back off the 2 screws (a), using a 4mm
hexagonal wrench.
2. Disconnect the 4
connectors highlight in the
figure at the side.
3. Remove the Brake Board box.
To reassemble the Brake board box, carry out
the above steps in reverse order.
To Next Page
Loading...
