Chapter 4 Software Index
4-1
Chapter 4 Software Index
4.1 Keypad Description
4.1.1Keypad Display and Operation Instruction
1. SEQ LED: Parameter 00-03(or00-04) =1/2/3, LED Lit.
2. FRQ LED: Parameter 00-05(or00-06) = 1/2/3/4, LED Lit
3. FWD LED: Forward Direction, LED action (Flash while stopped, solid Lit during operation).
4. REV LED: Reverse Direction, LED action (Flash while stopped, solid Lit during operation).
5. Four actions of FUN mode: Hz/RPM, VOLT, AMP LED, and display of five 7-segment display.
(Refer to operation description of the keypad).
Caution
To avoid keypad damage, do not operate it with a screwdriver or any sharp and hard tool.
Figure 4-1 Keypad Layout
To Next Page
Loading...
