TECO N310 Series - Auto Run (Auto Sequencer) Function Group; Copy Module

Chapter 4 Software Index
4-55
(2) cancel password：
1 open 12-08，display“ 00002”,input the correct password, press“ enter” key
, display “End”, Disable the password is successed.
If typing a wrong password, display “LOC” (password is still holded)
Note: set 12-08=00000, password can’t work
12-09 Copy module Reserved
Note: do not set Reserved Parameter .
Group13- Auto Run (Auto Sequencer) function group
Auto Run( sequencer) mode selection:
13-00: 0: Disabled.
1: Single cycle. (Continues to run from the unfinished step if restarted).
2: Periodic cycle. (Continues to run from the unfinished step if restarted).
3: Single cycle, then holds the speed of final step to run.
(Continues to run from the unfinished step if restarted).
4: Single cycle. (Starts a new cycle if restarted).
5: Periodic cycle. (Starts a new cycle if restarted).
6: Single cycle, then hold the speed of final step to run.
(Starts a new cycle if restarted).
13-01 : Auto _ Run Mode Frequency Command 1 (0-400Hz)
13-02 : Auto _ Run Mode Frequency Command 2 (0-400Hz)
13-03 : Auto _ Run Mode Frequency Command 3 (0-400Hz)
13-04 : Auto _ Run Mode Frequency Command 4 (0-400Hz)
13-05 : Auto _ Run Mode Frequency Command 5 (0-400Hz)
13-06 : Auto _ Run Mode Frequency Command 6 (0-400Hz)
13-07 : Auto _ Run Mode Frequency Command 7 (0-400Hz)
13-08 : Auto _ Run Mode Frequency Command 8 (0-400Hz)
13-09 : Auto _ Run Mode Frequency Command 9 (0-400Hz)
13-10 : Auto _ Run Mode Frequency Command 10 (0-400Hz)
13-11 : Auto _ Run Mode Frequency Command 11 (0-400Hz)
13-12 : Auto _ Run Mode Frequency Command 12 (0-400Hz)
13-13 : Auto _ Run Mode Frequency Command 13 (0-400Hz)
13-14 : Auto _ Run Mode Frequency Command 14 (0-400Hz)
13-15: Auto _ Run Mode Frequency Command 15 (0-400Hz)
13-16 : Auto_ Run Mode Running Time Setting 0 ( 0-3600sec)
13-17 : Auto_ Run Mode Running Time Setting 1 ( 0-3600sec)
13-18 : Auto_ Run Mode Running Time Setting 2 ( 0-3600sec)
13-19 : Auto_ Run Mode Running Time Setting 3 ( 0-3600sec)
13-20 : Auto_ Run Mode Running Time Setting 4 ( 0-3600sec)
13-21 : Auto_ Run Mode Running Time Setting 5 ( 0-3600sec)