TECO N310 Series - Frequency at or below Specified Range Example; Frequency Outside of Range Example; Over Torque Detection Example

Chapter 4 Software Index
4-31
01-09/10= 4: Frequency detection Fout > 01-11
01-09/10= 5: Frequency detection Fout < 01-11
1-09/10=12: over torque detection
01-13: s1～s5 switch type select
xxxx0: S1 NO xxxx1: NC xxx0x: S2 NO xxx1x: NC
xx0xx: S3 NO xx1xx: NC x0xxx: S4 NO x1xxx: NC
0xxxx: S5 NO 1xxxx: NC
01-14: s6 switch type select
xxxx0：s6 NO xxxx1：s6 NC
※Note: “NO”: Normal open, “NC”: Normal close.
The switches type is decided by 01-13/01-14,
Because of different types of switches, select switches type is necessary.
Figure 4-16 Frequency outside of range example
Figure 4-17 Frequency at or below specified range example
Figure 4-18 Over torque detection example