TECO N310 Series - Page 48

Chapter 4 Software Index
4-20
13-24 Auto_ Run Mode Running Time Setting 8
13-25 Auto_ Run Mode Running Time Setting 9
13-26 Auto_ Run Mode Running Time Setting 10
13-27 Auto_ Run Mode Running Time Setting 11
13-28 Auto_ Run Mode Running Time Setting 12
13-29 Auto_ Run Mode Running Time Setting 13
13-30 Auto_ Run Mode Running Time Setting 14
13-31 Auto_ Run Mode Running Time Setting 15
13-32 Auto_ Run Mode Running Direction 0
13-33 Auto_ Run Mode Running Direction 1
13-34 Auto_ Run Mode Running Direction 2
13-35 Auto_ Run Mode Running Direction 3
13-36 Auto_ Run Mode Running Direction 4
13-37 Auto_ Run Mode Running Direction 5
13-38 Auto_ Run Mode Running Direction 6
13-39 Auto_ Run Mode Running Direction 7
13-40 Auto_ Run Mode Running Direction 8
13-41 Auto_ Run Mode Running Direction 9
13-42 Auto_ Run Mode Running Direction 10
13-43 Auto_ Run Mode Running Direction 11
13-44 Auto_ Run Mode Running Direction 12
13-45 Auto_ Run Mode Running Direction 13
13-46 Auto_ Run Mode Running Direction 14
13-47 Auto_ Run Mode Running Direction 15
0:stop
1: forward
2: reverse
0
※Notes: *1 Can be modified during run
*2 cannot be modified while communication is active
*3 do not change while making factory setting
*4 the parameter will be changed by replacing model
*5 only available in V/F mode