TECO TP03 PLC - Directly Installation

Chapter4 Dimension and installation
Installation 4-6
2.2.1 Directly installation
Please use M4 ×15mm or bigger screws to fix the PLC in the distributors.
When the expansion cable (4cm) is used, please refer to 6.1 for installation dimension and use M4
screws to fix the units.
z Basic unit TP03-20□□-□/ TP03-30□□-□
>20mm
>20mm
z Basic unit TP03-40□□-□/ TP03-60□□-□
z Expansion unit
>20mm
>20mm
Power
>20mm
>20mm