EasyManuals Logo

Tenda i9 User Manual

Tenda i9
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
32
None
It allows any wireless client to connect to a wireless network. This option is not
recommended because it affects network security.
WEP
Parameter description
Parameter
Description
Authentication Type
It specifies the encryption type for the WEP security mode of the AP. The options
include Open, Shared, and 802.1x.
The options share the same encryption process.
Open
It specifies that authentication is not required and data exchanged is encrypted
using WEP. In this case, a wireless client can connect to the wireless network
corresponding to the selected SSID without being authenticated, and the data
exchanged between the client and the network is encrypted in WEP security mode.
Shared
It specifies that a shared key is used for authentication and data exchanged is
encrypted using WEP. In this case, a wireless client must use a preset WEP key to
connect to the wireless network corresponding to the selected SSID. The wireless
client can be connected to the wireless network only if they use the same WEP key.
802.1x
It specifies that 802.1x authentication is required and data exchanged is encrypted
using WEP. In this case, ports are enabled for user authentication when valid
clients connect to the wireless network corresponding to the selected SSID, and
disabled when invalid users connect to the wireless network.
Default Key
It specifies the default WEP key for the Open and Shared encryption types.
For example, if Default Key is set to Key 2, a wireless client can connect to the

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda i9 and is the answer not in the manual?

Tenda i9 Specifications

General IconGeneral
5 GHzNo
2.4 GHzYes
Bandwidth24 GHz
Channel bandwidth533 MHz
Transmitting power20 dBmW
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100 Mbit/s
Maximum data transfer rate300 Mbit/s
Internal-
PlacementCeiling, Wall
CertificationFCC/CE/RoHS
Product colorWhite
LED indicatorsSystem
Output current1 A
Output voltage12 V
Power consumption (max)8 W
Security algorithmsWEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Number of SSID supported4
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)-10 - 40 °C
Operating relative humidity (H-H)10 - 90 %
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports1
Antennas quantity2
Antenna gain level (max)2 dBi
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth184 mm
Height38 mm

Related product manuals