Texi Fox 25 User Manual

ES
TIPOS DE PUNTADA
COSTURA CON PUNTADA SIMPLE
PUNTADA TRIPLE RECTA
TIPO DE PIE PRENSATELA 
UNIVERSAL
1. Compruebe el pie prensatela
- debe tener colocado el pie
prensatela universal.
2. Gire el volante hacía usted,
hasta que la aguja se encuentre
en la posición más alta.
3. Eleve el pie prensatela y
coloque el material debajo de
éste.
4. Libere el pie prensatela.
5. Delicadamente conduzca el material como si se transportara de forma natural.
Aplique velócidad al coser.
6. Al nalizar de coser presiones la tecla de retroceso y cose 3-4 puntadas.
7. Eleve la palanca elevadora del pie prensatela.
8. Levante la aguja girando el volante. Retire el material cosido del pie prensatela.
Utilizando el cortador del lado de la máquina, corte los hilos.
La puntada triple se utiliza
principalmente para reforzar las
costuras. La aguja se desplaza 2
veces hacia delante y 1 vez hacia
atrás, lo que permite conseguir una
costura muy fuerte. Especialmente
recomendado para costura en
cuña, ropa de trabajo y deportiva.
Antes de ejecutar la puntada triple,
es necesario hilvanar el tejido o
sujetarlo con alleres.
13
UTILITY STITCHES
Straight stitch
Raise the presser foot and position the fabric next to a
stitching guide line on the needle plate.
Lower the needle into the fabric.
Lower the presser foot and smooth the thread towards the
back. Depress the foot control.
Gently guide the fabric along the guide line letting the
fabric feed by itself.
For fastening the ends of seams, press the reverse stitch
button and sew several reverse stitches.
Raise the presser foot and remove the fabric, drawing the
threads to back.
The threads are cut the proper length for starting the next
seam.
A
B
2~6
1.5~4
Machine Setting
15
UTILITY STITCHES
Tricot stitch
Place the fabric under the presser foot so
that the edge will be slightly inside the right
hand side of the presser foot.
Guide the work so the right hand stitches fall
at the edge of the fabric.
Triple strength stitch
The stitch is sewn with two stitches forward
and one stitch backward forming a seam
that does not rip easily.
Garments should be basted for fitting before
seaming.
D
1~4
0.5~1.5
Machine Setting
A B
2~6
S S
Machine Setting
15
UTILITY STITCHES
Tricot stitch
Place the fabric under the presser foot so
that the edge will be slightly inside the right
hand side of the presser foot.
Guide the work so the right hand stitches fall
at the edge of the fabric.
Triple strength stitch
The stitch is sewn with two stitches forward
and one stitch backward forming a seam
that does not rip easily.
Garments should be basted for fitting before
seaming.
D
1~4
0.5~1.5
Machine Setting
A B
2~6
S S
Machine Setting
Texi Fox 25104

Texi Fox 25 Specifications

General

Brand	Texi
Model	Fox 25
Category	Sewing Machine
Language	English