Texi Fox 25 - Cleaning the Feed Dog

EN
4. Remove the shuttle.
After nish assemble all parts.
CAUTION: Switch o the machine and unplug the
power supply before making below acitivies
Remove the needle and the presserfoot.
Remove the needle plate set screws and remove the
needle plate.
With a brush, clean out dust from the feed dog teeth.
Insert the needle plate.
5. Clean the shuttle race
with a brush and soft dry
cloth.
6. Before assembling the
shuttle race, oil the shuttle
race using a few drops of fine
qualitysewing machine oil.
"
CLEANING THE FEED DOG
Texi Fox 2584