EN
SHIRRING
HONEYCOMB STITCH
With the stitch length ‘‘4”,
sew straight stitching;
lines 3/8 apart across the
area to be shirred. Knot
the threads along one
edge, pull the bobbin
threads and distribute
the gathers evenly.
Secure the thread at
the other end. Sew
the honeycomb stitch
between the gathering
stitches. Pull out the
gathering stitches.
CLEANING AND REMOVING THE HOOK
CAUTION: Unplug the power supply before making below acitivies.
1. Raise the needle to its
highest position and open
the shuttle cover. Open
the hinged latch of the
bobbin case and take it
out of the machine.
2. Open the shuttle race
cover holders.
3. Remove the shuttle
race cover.
D
1~ 4
S S
Machine Setting
10mm(3/8" )
Wrong side of fabric
MAINTANANCE
Texi Fox 25 83
To Next Page
Loading...
Need help?
General
