Thermo 48i - Test Analog Outputs

Operation
Diagnostics Menu
Thermo Electron Corporation Model 48i Instruction Manual 3-85
Test Analog Outputs The Test Analog Outputs menu contains a number of digital to analog
converter (DAC) calibration items. The current channels are only displayed
if the I/O expansion board option is installed.
• In the Main Menu, choose Diagnostics > Test Analog Outputs.
• Use and to move the cursor up and down.
• Press to select output.
• Press to return to the Diagnostics menu or to return to
the Run screen.
XXLO WCONCENTRATIONXXLO W
CO 15.80 PPM
SAMPLE 12:34 ALARMx
RELAY STATE:
>OUTPUT 1 1
OUTPUT 2 0
OUTPUT 3 0
OUTPUT 4 1
OUTPUT 5 0
OUTPUT 6 0
OUTPUT 7 0
ª
RANGE AVG DIAGS ALARM
OUTPUT 8 0
OUTPUT 9 0
OUTPUT 10 0
XXLO WCONCENTRATIONXXLO W
CO 15.80 PPM
SAMPLE 12:34 ALARMx
TEST ANALOG OUTPUTS:
>ALL
VOLTAGE CHANNEL 1
VOLTAGE CHANNEL 2
VOLTAGE CHANNEL 3
VOLTAGE CHANNEL 4
VOLTAGE CHANNEL 5
VOLTAGE CHANNEL 6
ª
RANGE AVG DIAGS ALARM