C-Link Protocol Commands
Hardware Configuration
B-30 Model 48i Instruction Manual Thermo Electron Corporation
This command reports whether temperature compensation is on or off. The
example below shows the temperature compensation is off.
Send: temp comp
Receive: temp comp off
set temp comp onoff
These commands turn the temperature compensation on or off. The
example below turns temperature compensation off.
Send: set temp comp off
Receive: set temp comp off ok
Hardware
Configuration
contrast
This command reports the screen’s level of contrast. The example below
shows the screen contrast is 50%, according to Table B-7.
Send: contrast
Receive: contrast 5:50%
set contrast level
This command sets the screen’s level of contrast, according to Table B-7.
The example below sets the contrast level to 50%.
Send: set contrast 5
Receive: set contrast 5 ok
date
Table B-7. Contrast Levels
Level Contrast Level
00%
1 10%
2 20%
3 30%
4 40%
5 50%
6 60%
7 70%
8 80%
9 90%
10 100%
To Next Page
Loading...
