Thermo 48i - Page 76

Operation
Instrument Controls Menu
3-54 Model 48i Instruction Manual Thermo Electron Corporation
Output Relay Settings The Output Relay Settings menu displays a list of the analog output relays
available, and allows the user to select the instrument parameter or logic
state to change for the relay selected.
Note The digital outputs may take up to one second after the assigned state
occurs to show up on the outputs. 
• In the Main Menu, choose Instrument Controls > I/O Configuration >
Output Relay Settings > 1-10.
• Use and to move the cursor up and down.
• Press to select a choice.
• Press to return to the I/O Configuration menu or to
return to the Run screen.
XXLO WCONCENTRATIONXXLO W
CO 15.80 PPM
SAMPLE 12:34 ALARMx
I/O CONFIGURATION:
>OUTPUT RELAY SETTINGS
DIGITAL INPUT SETTINGS
ANALOG OUTPUT CONFIG
ANALOG INPUT CONFIG
RANGE AVG DIAGS ALARM