3
Learning Center
Set Up the Instrument
Thermo Scientific NanoDrop One User Guide 185
–tap Back to exit Wi-Fi setup (if the connection is successful, the instrument is
assigned an IP (Internet Protocol) address, which appears at the right of the Wi-Fi
button as in the example below)
– record IP address (you will need to enter it on the remote computer in the next
section)
–tap Done to exit Settings
Note Some Wi-Fi networks may require an identity, password or other
information before you can connect to them, or they may be anonymous (that is,
you may have to search for them by name). For more information, see the system
administrator at your work site.
To Next Page
Loading...
