TOMARK, s.r.o.
Airplane Maintenance Manual
Chapter32 Landing Gear
Page 122 Issue: 11.AUG 2016
32-10 Main Gear
The main landing gear legs are a composite spring type design with
individual springs for right and left hand side.
32-10-01 Main Gear Leg
Removal
▶ Bleed brake system on the affected aircraft side as per Chapter
12-
10-04 Brake Fluid Bleeding
.
▶ Remove seat on the affected aircraft side to get access to the landing
gear leg attachment as per Chapter
25-10-01 Seats
.
▶ Remove affected paneling.
▶ Jack the affected aircraft side as per Chapter
07-10-01 Jacking the
Aircraft Side
.
▶ Note position of brake hose cable ties.
▶ Remove affected cable ties.
▶ Disconnect brake hose from brake.
▶ Remove main gear leg (4 bolts).
Installation
▶ Install in reverse sequence of removal.
▶ Replenish brake fluid as per Chapter
12-10-05 Brake Fluid
Replenishing
.
To Next Page
Loading...