TOMARK, s.r.o.
Airplane Maintenance Manual
Chapter01 Introduction
Page 16 Issue: 04.APR 2016
01 Introduction
01-00 General
This Maintenance Manual provides educated maintenance staff
information necessary for servicing, maintenance and repair of the
Viper SD-4 RTC Type aircraft. It contains a detailed description of
systems including time limits for the particular components and
instructions for the performance of inspections and maintenance.
All service, maintenance, inspections, repairs and/or modifications
shall be performed by adequately qualified/licensed personnel in
accordance with the applicable continued airworthiness regulations.
For any maintenance or repair activity not addressed in this manual,
contact TOMARK s.r.o. for approved instructions.
The instructions for installation, service, repair and maintenance of
optional equipment shall be collected with this Manual.
01-10 Coverage
This manual provides servicing and maintenance information for all
Viper SD-4 RTC aircraft.
Maintenance actions that refer to a limited number of aircraft will be
designated by serial numbers of the applicable aircraft.
01-20 Guidelines
For general information on acceptable methods, techniques and
practices, if not presented here, refer to CS-STAN (CS-SR801a).
To Next Page
Loading...