TOMARK, s.r.o.
Airplane Maintenance Manual
Chapter32 Landing Gear
Page 128 Issue: 11.AUG 2016
▶ Install 4 Allen screws with washers on the inboard side of the wheel
fairing.
32-40-02 Main Wheel
Removal
▶ Remove wheel fairing as per Chapter
32-40-01 Main Wheel Fairing
if
applicable.
▶ Jack the applicable aircraft side as per Chapter
07-10-01 Jacking the
Aircraft Side
.
▶ Disconnect brake line.
▶ Remove wheel axle nut.
▶ Remove wheel.
Installation
▶ Hold wheel fairing supporting sheet in place.
▶ Install wheel by inserting the wheel axle to the landing gear leg.
▶ Install wheel axle nut.
▶ Connect brake line.
▶ Replenish brake fluid as per Chapter
12-10-05 Brake Fluid
Replenishing
.
Disassembly
Disassembly of main wheel must be carried out e.g. for tire change.
▶ Deflate tire.
▶ Remove 5 Allen screws.
▶ Disassemble wheel.
Assembly
▶ Assemble in reverse sequence of disassembly.
To Next Page
Loading...