TOMARK Viper SD-4 RTC - Major Inspection Airframe

TOMARK, s.r.o.
Airplane Maintenance Manual
Chapter 04 Limitations
Issue: 04.APR 2016 Page 25
04-20 Placards
For Markings and Placards refer to Viper SD-4 RTC Aircraft Flight
Manual, Section 2, Document N°: TOM-TC-01-AFM.
04-30 Major Inspection
04-30-10 Major Inspection Airframe
The major airframe inspection program is not defined at time of print.
Upon reaching 2000hrs contact TOMARK.
Primarily addressed components are:
Component
Relevant P/N
Wing main spar
SD4-A-2-021-N-1
Wing aft spar
SD4-A-2-222-P-3; SD4-A-2-223-N-3
Main fuselage cross beam
SD4-A-1-075-N-1
Aft fuselage cross beam
SD4-A-1-236-N-3
Aft spar attachment
SD4-A-1-294-L-7; SD4-A-1-295-L-7;
SD4-A-1-295-P-7; SD4-A-1-294-P-7;
SD4-A-1-244-N-3
Horizontal stabilizer spar
SD4-A-3-031-N-3
Horizontal stabilizer
interface
SD4-A-1-156-N-3; SD4-A-1-157-N-
3
Elevator torsion bracket
SD4-A-3-007-N-2
Vertical stabilizer spar
SD4-A-4-024-N-3; SD4-A-4-998-N-
1
Vertical stabilizer
interface
SD4-A-1-071-N-1
Brackets adjacent to
engine mount
SD4-A-1-993-N-1; SD4-A-1-500-N-
3;
SD4-A-1-509-L-7; SD4-A-1-509-P-7