TOMARK, s.r.o.
Airplane Maintenance Manual
Chapter71 Power Plant
Issue: 28.FEB 2017 Page 173
71-60 Air Intakes
The cylinder air cooling is provided by an air flow directed from left
air inlet on engine cowling via composite baffle equipped with a
controllable cowl flap. This flap is controllable from the inside of the
cockpit, located on the right side of the instrument panel. Pulling the
control knob is used as “cylinder warm” and pushing the control
button used for “cylinder cold”.
The engine air is taken from one air inlets aft top of engine
compartment behind the air box guided by hoses into the air box.
The air inlet contains an air filter. A carburetor heating function is
provided by mixing the air with warm air from close to the exhaust.
From the air box the air is guided by hoses into the carburetors.
To Next Page
Loading...