TOMARK, s.r.o.
Airplane Maintenance Manual
Chapter 04 Limitations
Issue: 04.APR 2016 Page 27
Major Inspection engine mount
Refinish top coat at weld nodes as required. Touch up top coat at all other
identified scratches
Reinstall engine (if removed)
Make appropriate airplane log book entry for release to further service
04-40 Software
Only Software delivered with the airplane, or as mandated by
respective Service Bulletins are approved to be used in the Viper SD-4
RTC. This addresses:
Software revision
(approved at time of print)
To Next Page
Loading...