TOMARK, s.r.o.
Airplane Maintenance Manual
Chapter 05 Inspection and Maintenance
Page 40 Issue: 04.APR 2016
Demount the wing root fairings.
Visually check the condition of the wing root fairings for
cracks and other damage. Repair or replace, if necessary.
Check the torque and locking of the main wing spar bolts and
of the rear spar bolt with a torque wrench.
Visually inspect all the connections at wing attachments.
Check the attachment of the wings for play by moving the
wing forward and back, up and down.
Lubricate according to the lubrication plan Section
05-20-02
Lubrication Chart
.
Reinstall the wing root fairings only after the completion of
the inspection.
Visually check the skin and the riveting. No deformities,
cracks or loosened rivets are allowed.
Visually check the rivets near the main landing gear legs.
Check the condition and the attachment of the antennas,
beacons and other external installations
Perform Major inspection according to
04-30-10.
Visually check the canopy for cracks, scratches and other
damage. In case of crack detection contact TOMARK Aero for
instructions.
Check the condition of all attachments of the canopy.
Check the condition and movement of the canopy windows.
Check the functioning of the gas springs.
Check the condition of the canopy sealing.
To Next Page
Loading...