TOMARK Viper SD-4 RTC - Page 42

TOMARK, s.r.o.
Airplane Maintenance Manual
Chapter 05 Inspection and Maintenance
Page 42 Issue: 04.APR 2016
Scheduled Inspection
(50 h)
100 h/
annual
as
specified
Lubricate according to the lubrication plan 05-20-02
Lubrication Chart .
○
Check the connection of the elevator controls.
500h/
5 years
Vertical Stabilizer
Visually check the condition of the vertical stabiliser.
Deformations, cracks, scratches and loosened rivets are not
allowed.
○
○
Check the condition and attachment of the stabilizer tip
fairing.
○
○
Check the condition of the rudder hinges.
○
○
Check the elements of the attachment of the vertical
stabiliser, the torque and locking of the connecting elements.
Check for other possible damage.
○
Rudder
Visually check the condition of the rudder, check the hinges.
Deformations, cracks, scratches and loosened rivets are not
allowed.
○
○
Visually check the hinge for corrosion, the torque and locking
of the pins and connections of the rudder control.
○
○
Lubricate according to the lubrication plan 05-20-02
Lubrication Chart .
○
○
Check the positioning of the rudder and maximum deflections
(rudder stops).
500h/
5 years
Check the connection of the rudder.
500h/
5 years
Cockpit
Seats and harness
Demount the seats and the panelling of the cockpit (mount
back after the inspection has been completed).
○
○