EasyManua.ls Logo

TOMARK Viper SD-4 RTC - Page 45

TOMARK Viper SD-4 RTC
203 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TOMARK, s.r.o.
Airplane Maintenance Manual
Chapter 05 Inspection and Maintenance
Issue: 04.APR 2016 Page 45
Scheduled Inspection
(50 h)
100 h/
annual
as
specified
Check aileron trim deflections with aileron neutral. Nominal
values:
Up +28⁰ ± 2⁰
Down -28⁰ ± 2⁰
500h/
5 years
Rudder Control System
Check for condition and proper, smooth operation through
full travel. Check for free movement.
Check rudder travel stops for signs of overload.
Inspect Bowden cables for wear, security, condition and
operation through full travel.
Check Bowden cable counter brackets for condition and
secure fastening of adjustment.
Check cable tension.
Check rudder pedals for general condition and proper
attachment. Visually inspect for cracks and deformation.
Check rudder deflections. Nominal values:
Left +30⁰ ± 1⁰
Right -30⁰ ± 1⁰
500h/
5 years
Fuel System (excluding firewall forward)
Turn on the fuel pump (do not start the engine). Open shut-
off valve and check all fuel system connections downstream of
the electric fuel pump for leaks.
200h/
2 Years
Check fuel pressure indication reads 0.17-0.5bar (fuel pump
on).
If values are outside 0.17-0.5bar, inspect fuel lines for
clogging and kinks, and replace fuel filter.
200h/
2 Years
Check fuel selector valve function by closing while fuel pumps
are running. Check fuel pressure indication drop, re-open fuel
selector valve and check fuel pressure regain.
200h/
2 Years
Fuel Tank
Inspect fuel tank for evidence of leakage and/or damage.

Table of Contents