Tomberlin 2010 E-Merge - Mounting of the Speed Sensor Magnet; Readjustment of the Electric Motor; Removal of the Speed Sensor Magnet

Electric Motor
MERGE 12-7
Chapter 12
Removal of the speed sensor magnet
Remove the bolts
○
19 , and take down the speed sensor magnet
○
18 （see Fig 12-7).
Mounting of the speed sensor magnet
Mount the speed sensor magnet
○
18 to the shaft with bolts
○
19 , and tighten the torque of the bolts with
22 inch pound（2.5N·m）。
Readjustment of the electric motor
The electric motor should be readjusted by professional motor maintenance technician. The use of
corresponding activities and procedures is crucial to the success of readjustment to the electric motor.